EXT100-eARC.2
100M eARC Extender Over Single Cat5 / 6e
SKU
190282
MPN:
EXT100-eARC.2
 |
100m (330ft) over a single Cat 5e/6 |
 |
eARC audio supports Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master |
 |
Bi-directional POC |
LINK Brand EXT100-eARC.2 100M eARC Extender Over Single Cat5/6e. This Audio Extender can transmit both HDMI eARC and S/PDIF audio signals over a single CAT cable. The transmission distance is up to 100ml 328ft. It supports CEC pass-through between HDMI eARC input port and eARC output port to handshake for eARC transmission. For TVs without HDMI eARC function, the extender provides an independent S/PDIF audio pass-through channel to transmit S/PDIF audio from the S/PDIF IN port of the transmitter to the S/PDIF OUT port of the receiver. This is a fantastic plug and play solution for sending HDMI eARC and S/PDIF audio from an HDTV back to an amplifier, AVR or multi-room audio system.
- Extend HDMI eARC or S/PDIF audio signal up to 100m/328ft over a single CAT cable
- Support CEC pass-through when HDMI eARC mode is enabled
- Support the following audio formats:
- eARC: PCM 2.0/5.1/7.1ch, DD, DD+, DTS, Dolby TrueHD, DTS-HD MA, Dolby Atmos
- ARC: PCM 2.0ch, Dolby 5.1ch, DTS 5.1ch
- S/PDIF: PCM 2.0ch, Dolby 5.1 ch, DTS 5.1 ch
- Support bi-directional PoC (Power over Cable) function
- Compact design for easy and flexible installation
| Transmission Distance | 100m/328ft |
| Input / Output | Transmitter: Input: 1 x S/PDIF IN [Optical Audio Jack] 1 x eARC IN [HDMI Type A, 19-pin female] Output: 1 x CAT OUT [RJ45, female] Control: 1 x SERVICE Receiver: Input: 1 x CAT IN [RJ45, female] Output: 1 x S/PDIF OUT [Optical Audio Jack] 1 x eARC OUT [HDMI Type A, 19-pin female] Control: 1 x SERVICE |
| Audio Format Supported | eARC: PCM 2.0/5.1/7.1ch, DD, DD+, DTS, Dolby TrueHD, DTS-HD MA, Dolby Atmos ARC: PCM 2.0CH, Dolby 5.1CH, DTS 5.1CH S/PDIF: PCM 2.0CH, Dolby 5.1CH, DTS 5.1CH |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 20% to 90% RH (non-condensing) |
| ESD Protection | Human-body Model: ±8kV (Air-gap discharge) ±4kV (Contact discharge) |
| Power Supply | Input: AC 100-240V 50/60Hz Output: DC 12V/1A (US/EU standard, CE/FCC/UL certified) |
| Power Consumption | 5.65W (Max) |
| Housing | Metal Enclosure |
| Device Dimension (W x H x D) |
Transmitter: 3.54" x 0.78’’ x 2.83’’ (90mm x 20mm x 72mm) Receiver: 3.54" x 0.78’’ x 2.83’’ (90mm x 20mm x 72mm) |
| Product Weight | Transmitter: 184g / 0.4lb Receiver: 184g / 0.4lb |